# Google Mirror

**URL:** https://nonsuch.discourse.group/c/mirror/18.md?page=1

[Latest](https://nonsuch.discourse.group/latest.md) · [Categories](https://nonsuch.discourse.group/categories.md) · [Tags](https://nonsuch.discourse.group/tags.md)

**Page:** 2

---

## [Mast area noise](https://nonsuch.discourse.group/t/mast-area-noise/1784)

<div class="topic-metadata">

**Author:** [@jhbarbour\_gmail.com](https://nonsuch.discourse.group/u/jhbarbour_gmail.com)\
**Replies:** 8\
**Last updated:** [September 21, 2025, 8:58pm UTC](https://nonsuch.discourse.group/t/mast-area-noise/1784 "2025-09-21T20:58:12Z")

</div>

We were out on Lake Ontario when i heard a noise coming from somewhere around the mast. The winds were about 12 knots with about 3 foot waves. We were on a close reach, and with the waves hitting the side of the boat, th…

---

## [Re: Group Rates is $180](https://nonsuch.discourse.group/t/re-group-rates-is-180/1762)

<div class="topic-metadata">

**Author:** [@jonlewit](https://nonsuch.discourse.group/u/jonlewit)\
**Replies:** 1\
**Last updated:** [September 16, 2025, 3:15am UTC](https://nonsuch.discourse.group/t/re-group-rates-is-180/1762 "2025-09-16T03:15:12Z")

</div>

A side note - an actively supported system handles SPAM. Discourse blocked the post, silenced the user, and notified the system admins to review these actions. Google Groups, at this point, just seems to be running on au…

---

## [3/8 reefing lines still recommended?](https://nonsuch.discourse.group/t/3-8-reefing-lines-still-recommended/1731)

<div class="topic-metadata">

**Author:** [@Jeff](https://nonsuch.discourse.group/u/Jeff)\
**Replies:** 12\
**Last updated:** [September 15, 2025, 3:18pm UTC](https://nonsuch.discourse.group/t/3-8-reefing-lines-still-recommended/1731 "2025-09-15T15:18:06Z")

</div>

We were experimenting with the reefing setup on my new-to-us NS26 Ultra. After running the 3/8" reefing line through the cringles and hauling up the sail, there seemed to be a significant increase in friction - yes the c…

---

## [SEVERE Prop Walk](https://nonsuch.discourse.group/t/severe-prop-walk/1698)

<div class="topic-metadata">

**Author:** [@Shirleycheung2](https://nonsuch.discourse.group/u/Shirleycheung2)\
**Replies:** 30\
**Last updated:** [September 14, 2025, 1:44pm UTC](https://nonsuch.discourse.group/t/severe-prop-walk/1698 "2025-09-14T13:44:55Z")

</div>

Hello all, I am a new owner of a N30 C in Toronto, Canada. My engine is a 1983 Westerbeke 27. I am having SO much difficulty getting out of my slip because of my prop walk. When I reverse at low RPM (10K), the stern tu…

---

## [Turning block](https://nonsuch.discourse.group/t/turning-block/1651)

<div class="topic-metadata">

**Author:** [@Bill](https://nonsuch.discourse.group/u/Bill)\
**Replies:** 9\
**Last updated:** [September 7, 2025, 11:57am UTC](https://nonsuch.discourse.group/t/turning-block/1651 "2025-09-07T11:57:34Z")

</div>

On our new boat, we realize we have a deteriorated turning block at the base of the mast. It is a Schaefer #30-56 double foot block Can anyone suggest a good source for a replacement? Thank you. Bill Randall s/v Hele…

---

## [Should I release the choker line all the way while raising the sail?](https://nonsuch.discourse.group/t/should-i-release-the-choker-line-all-the-way-while-raising-the-sail/1347)

<div class="topic-metadata">

**Author:** [@siva](https://nonsuch.discourse.group/u/siva)\
**Replies:** 27\
**Last updated:** [September 7, 2025, 2:56am UTC](https://nonsuch.discourse.group/t/should-i-release-the-choker-line-all-the-way-while-raising-the-sail/1347 "2025-09-07T02:56:33Z")

</div>

I used to follow the below steps while raising the sail. Point the bow in the direction of the wind with engine on low RPM Release the main Release the choker Raise the sail Bring in the choker Adjust the main sheet an…

---

## [replacement bulb for anchor light.](https://nonsuch.discourse.group/t/replacement-bulb-for-anchor-light/1669)

<div class="topic-metadata">

**Author:** [@Bill](https://nonsuch.discourse.group/u/Bill)\
**Replies:** 7\
**Last updated:** [September 7, 2025, 2:53am UTC](https://nonsuch.discourse.group/t/replacement-bulb-for-anchor-light/1669 "2025-09-07T02:53:45Z")

</div>

Our anchor light is not working so we plan to change the bulb. Does anyone know what bulb we’ll need? I’d rather ascend with the right bulb than make any more trips than necessary. I appreciate the help. Bill Randall H…

---

## [Hood Anchor Riding Sail](https://nonsuch.discourse.group/t/hood-anchor-riding-sail/1638)

<div class="topic-metadata">

**Author:** [@ChipWilkerson](https://nonsuch.discourse.group/u/ChipWilkerson)\
**Replies:** 6\
**Last updated:** [September 5, 2025, 1:27pm UTC](https://nonsuch.discourse.group/t/hood-anchor-riding-sail/1638 "2025-09-05T13:27:51Z")

</div>

All Curious if anyone out there has a Hood riding sail? Looking for guidance on how to rig it. Thanks! Chip Wilkerson Moonshadow NS 33 Barrington RI

---

## [Hudson River Gybe Videos](https://nonsuch.discourse.group/t/hudson-river-gybe-videos/1597)

<div class="topic-metadata">

**Author:** [@PaulM](https://nonsuch.discourse.group/u/PaulM)\
**Replies:** 14\
**Last updated:** [August 30, 2025, 3:58pm UTC](https://nonsuch.discourse.group/t/hudson-river-gybe-videos/1597 "2025-08-30T15:58:20Z")

</div>

Last weekend I had Mark Powers aboard with me in Ganges Harbour and we took the opportunity to make a couple of videos of the much discussed Hudson River gybe. Through the wonders of modern e-gadgetry I was able to slow…

---

## [26 Ultra- Rpm's Degrade in gear after 1 to 2 minutes](https://nonsuch.discourse.group/t/26-ultra-rpms-degrade-in-gear-after-1-to-2-minutes/894)

<div class="topic-metadata">

**Author:** [@templeton](https://nonsuch.discourse.group/u/templeton)\
**Replies:** 15\
**Last updated:** [August 30, 2025, 2:56pm UTC](https://nonsuch.discourse.group/t/26-ultra-rpms-degrade-in-gear-after-1-to-2-minutes/894 "2025-08-30T14:56:09Z")

</div>

Hello, Westerbeke 21A Engine with all filters (2-fuel), fluids (transmission and engine) recently done. New impellor just done. No smoke, good exhaust water. What happens: Engine starts on first attempt. Engine pu…

---

## [Boat Trim Question](https://nonsuch.discourse.group/t/boat-trim-question/1481)

<div class="topic-metadata">

**Author:** [@Rob](https://nonsuch.discourse.group/u/Rob)\
**Replies:** 19\
**Last updated:** [August 29, 2025, 6:50pm UTC](https://nonsuch.discourse.group/t/boat-trim-question/1481 "2025-08-29T18:50:06Z")

</div>

Hi All, I’ve been working to help Soave sail to her rating. I understand my sailing skills are a part of the equation. Working on that variable by practicing. Last season I focused on sail trim because she was experien…

---

## [A little mishap today - Ripped Tack Cringle/Grommet](https://nonsuch.discourse.group/t/a-little-mishap-today-ripped-tack-cringle-grommet/1577)

<div class="topic-metadata">

**Author:** [@Google-group-posting](https://nonsuch.discourse.group/u/Google-group-posting)\
**Replies:** 4\
**Last updated:** [August 27, 2025, 5:02pm UTC](https://nonsuch.discourse.group/t/a-little-mishap-today-ripped-tack-cringle-grommet/1577 "2025-08-27T17:02:37Z")

</div>

Today, while sailing downwind in 16-18 kts, full main, sail way out there, clocking about 8 kts STW, I hit a wave from a boat. The mast flexed (boat slows down, mast tip does not, mast bends forward, requiring the luff o…

---

## [Cradle Pad - where to buy?](https://nonsuch.discourse.group/t/cradle-pad-where-to-buy/1565)

<div class="topic-metadata">

**Author:** [@Shirleycheung2](https://nonsuch.discourse.group/u/Shirleycheung2)\
**Replies:** 5\
**Last updated:** [August 24, 2025, 3:19pm UTC](https://nonsuch.discourse.group/t/cradle-pad-where-to-buy/1565 "2025-08-24T15:19:10Z")

</div>

Hello, I finally close the deal for the Nonsuch 30C and the owner gave me 3 cradle pads. One of the pads fell off and I need to find a replacement. It is a 3 inch thick material. I went to home depot and they have none …

---

## [Nonsuch Maintenance Procedures - Rudder Post to Hull Seal Renewal (a reply to an old posting)](https://nonsuch.discourse.group/t/nonsuch-maintenance-procedures-rudder-post-to-hull-seal-renewal-a-reply-to-an-old-posting/1551)

<div class="topic-metadata">

**Author:** [@matt.hidinger\_gmail](https://nonsuch.discourse.group/u/matt.hidinger_gmail)\
**Replies:** 3\
**Last updated:** [August 23, 2025, 11:28am UTC](https://nonsuch.discourse.group/t/nonsuch-maintenance-procedures-rudder-post-to-hull-seal-renewal-a-reply-to-an-old-posting/1551 "2025-08-23T11:28:59Z")

</div>

Hi all, I’ve noticed water pooling near my engine bed and finally traced it back to my rudder post, here is a video that shows it clearly while underway. Thankfully the water only comes in while motoring and the transom…

---

## [Raising sail at mooring](https://nonsuch.discourse.group/t/raising-sail-at-mooring/1527)

<div class="topic-metadata">

**Author:** [@Dickbart](https://nonsuch.discourse.group/u/Dickbart)\
**Replies:** 13\
**Last updated:** [August 22, 2025, 2:20pm UTC](https://nonsuch.discourse.group/t/raising-sail-at-mooring/1527 "2025-08-22T14:20:29Z")

</div>

I’m an experienced sailor but new to Nonsuch. I was very interested in the recent conversation on raising the sail underway while single handing. I do have an auto pilot and that seemed to be a key for success. I have a…

---

## [Source for Stanchion suppots](https://nonsuch.discourse.group/t/source-for-stanchion-suppots/1462)

<div class="topic-metadata">

**Author:** [@Bill](https://nonsuch.discourse.group/u/Bill)\
**Replies:** 11\
**Last updated:** [August 20, 2025, 3:34pm UTC](https://nonsuch.discourse.group/t/source-for-stanchion-suppots/1462 "2025-08-20T15:34:27Z")

</div>

Hello to the group, I am one of the new owners of the Helen K, a 30 Ultra , previously owned by Larry Koenig of Key Largo. Currently I am replacing a stanchion and am looking for the original source for stanchions and st…

---

## [Proper Mooring Hookup for NS 22](https://nonsuch.discourse.group/t/proper-mooring-hookup-for-ns-22/1529)

<div class="topic-metadata">

**Author:** [@Dickbart](https://nonsuch.discourse.group/u/Dickbart)\
**Replies:** 4\
**Last updated:** [August 20, 2025, 3:22pm UTC](https://nonsuch.discourse.group/t/proper-mooring-hookup-for-ns-22/1529 "2025-08-20T15:22:14Z")

</div>

This is my first season with my Nonsuch. I am at a mooring that has two lines, both big enough to hold a battleship. I run one line that has the pickup attached through the port lead (it barely squeezes through!), direct…

---

## [Boat cover vs Shrink Wrap](https://nonsuch.discourse.group/t/boat-cover-vs-shrink-wrap/1485)

<div class="topic-metadata">

**Author:** [@Shirleycheung2](https://nonsuch.discourse.group/u/Shirleycheung2)\
**Replies:** 24\
**Last updated:** [August 19, 2025, 11:53pm UTC](https://nonsuch.discourse.group/t/boat-cover-vs-shrink-wrap/1485 "2025-08-19T23:53:42Z")

</div>

Hello all, My to-be purchase sailboat N30C is located in Toronto Canada. Every year, we have to take the mast and wishbone down, haul the whole boat out of water and put it on a cradle for 6 months a year. So, technical…

---

## [Two weeks from today..](https://nonsuch.discourse.group/t/two-weeks-from-today/1495)

<div class="topic-metadata">

**Author:** [@Google-group-posting](https://nonsuch.discourse.group/u/Google-group-posting)\
**Replies:** 0\
**Last updated:** [August 17, 2025, 2:23am UTC](https://nonsuch.discourse.group/t/two-weeks-from-today/1495 "2025-08-17T02:23:17Z")

</div>

The Port Jeff rendezvous takes place, well, it will have taken place. That’s of course unless “ Hurricane Erin” has something to say about it. Stay tuned. Regards, Gary /Aloki/ Oyster Bay ..:anchor:

---

## [Pressure Arm Assembly for Lewmar anchor winch?](https://nonsuch.discourse.group/t/pressure-arm-assembly-for-lewmar-anchor-winch/1435)

<div class="topic-metadata">

**Author:** [@adwelley\_gmail.com](https://nonsuch.discourse.group/u/adwelley_gmail.com)\
**Replies:** 1\
**Last updated:** [August 10, 2025, 3:45pm UTC](https://nonsuch.discourse.group/t/pressure-arm-assembly-for-lewmar-anchor-winch/1435 "2025-08-10T15:45:35Z")

</div>

We have a Lewmar Ocean 002 anchor winch that is missing the “pressure arm assembly with spring”. Lewmar stopped making this part, and I’m curious if anyone has removed or dissambled an Ocean Model or Concept Model and m…

---

## [Discourse (email comment)](https://nonsuch.discourse.group/t/discourse-email-comment/1426)

<div class="topic-metadata">

**Author:** [@Mirthin](https://nonsuch.discourse.group/u/Mirthin)\
**Replies:** 6\
**Last updated:** [August 9, 2025, 7:53pm UTC](https://nonsuch.discourse.group/t/discourse-email-comment/1426 "2025-08-09T19:53:42Z")

</div>

If Discourse would send emails or texts to keep everyoje involved and up-to-date it would be a very good resource but, so far as I can see, it only does that through Google as part of the mirror function. Google groups h…

---

## [PHRF](https://nonsuch.discourse.group/t/phrf/845)

<div class="topic-metadata">

**Author:** [@Tom](https://nonsuch.discourse.group/u/Tom)\
**Replies:** 19\
**Last updated:** [August 7, 2025, 4:49pm UTC](https://nonsuch.discourse.group/t/phrf/845 "2025-08-07T16:49:45Z")

</div>

I am curious to know what PHRF rating a 30c with a 3 blade fixed prop carries. Mine on Lake. Ontario in at 162 which is the same as a CS 32 and a Catalina 34. I guess this message would be directed to LONA members primar…

---

## [Local knowledge  Labor Day Raft up / Port Jefferson , NY location chart.](https://nonsuch.discourse.group/t/local-knowledge-labor-day-raft-up-port-jefferson-ny-location-chart/1402)

<div class="topic-metadata">

**Author:** [@Google-group-posting](https://nonsuch.discourse.group/u/Google-group-posting)\
**Replies:** 1\
**Last updated:** [August 7, 2025, 1:17pm UTC](https://nonsuch.discourse.group/t/local-knowledge-labor-day-raft-up-port-jefferson-ny-location-chart/1402 "2025-08-07T13:17:04Z")

</div>

Hiya Bill, always interested in local knowledge. Pls share ! (chart provided for your convenience)

---

## [Discourse website](https://nonsuch.discourse.group/t/discourse-website/1411)

<div class="topic-metadata">

**Author:** [@Mirthin](https://nonsuch.discourse.group/u/Mirthin)\
**Replies:** 1\
**Last updated:** [August 6, 2025, 6:11pm UTC](https://nonsuch.discourse.group/t/discourse-website/1411 "2025-08-06T18:11:49Z")

</div>

I have signed into Discourse but now realize that despite being fairly familiar with various chat groups I have no clue how to access it. I see that it has an App but how do I get it to appear on my laptop? Nick Hirst M…

---

## [Auto prop.](https://nonsuch.discourse.group/t/auto-prop/1261)

<div class="topic-metadata">

**Author:** [@William](https://nonsuch.discourse.group/u/William)\
**Replies:** 6\
**Last updated:** [August 5, 2025, 7:07pm UTC](https://nonsuch.discourse.group/t/auto-prop/1261 "2025-08-05T19:07:57Z")

</div>

Anyone who has an auto prop had to replace the bearings? Thanks. Bill Evans Companionship NS 30U #465 Galesville MD.

---

## [Settings up reef 1 and clue line 1 and reef line 2 and clue line 2.](https://nonsuch.discourse.group/t/settings-up-reef-1-and-clue-line-1-and-reef-line-2-and-clue-line-2/1356)

<div class="topic-metadata">

**Author:** [@wallynmoll](https://nonsuch.discourse.group/u/wallynmoll)\
**Replies:** 8\
**Last updated:** [August 5, 2025, 4:38pm UTC](https://nonsuch.discourse.group/t/settings-up-reef-1-and-clue-line-1-and-reef-line-2-and-clue-line-2/1356 "2025-08-05T16:38:52Z")

</div>

I not clear and setting up each of the reef lines and clue lines. I have looked at the rigging information in the online manuals but still not sure how to set up the reef and clew lines in order to easily reef the mains…

---

## [Soave - Pondering weather helm.](https://nonsuch.discourse.group/t/soave-pondering-weather-helm/1251)

<div class="topic-metadata">

**Author:** [@Rob](https://nonsuch.discourse.group/u/Rob)\
**Replies:** 27\
**Last updated:** [August 4, 2025, 9:26pm UTC](https://nonsuch.discourse.group/t/soave-pondering-weather-helm/1251 "2025-08-04T21:26:27Z")

</div>

I’ve was avid dingy racer for many years and have been hesitant to return to racing with Soave because I didn’t believe she ( or I ) was ready to perform credibly. One of my concerns is weather helm. When close hauled i…

---

## [Save the date - Labor Day Raft up / Port Jefferson , NY](https://nonsuch.discourse.group/t/save-the-date-labor-day-raft-up-port-jefferson-ny/1185)

<div class="topic-metadata">

**Author:** [@Google-group-posting](https://nonsuch.discourse.group/u/Google-group-posting)\
**Replies:** 13\
**Last updated:** [August 4, 2025, 6:26pm UTC](https://nonsuch.discourse.group/t/save-the-date-labor-day-raft-up-port-jefferson-ny/1185 "2025-08-04T18:26:34Z")

</div>

Greetings fellow Nonsuchers If of interest, please save the date for an informal raft up in Port Jefferson Harbor , Long Island this Labor Day weekend. (40.44.20N x -073.-4.48W - Old Field Point “PJ WHIS” entrance). …

---

## [Ultra Starter](https://nonsuch.discourse.group/t/ultra-starter/1338)

<div class="topic-metadata">

**Author:** [@Apollo](https://nonsuch.discourse.group/u/Apollo)\
**Replies:** 9\
**Last updated:** [August 4, 2025, 12:42am UTC](https://nonsuch.discourse.group/t/ultra-starter/1338 "2025-08-04T00:42:33Z")

</div>

Boat yard just informed me I need a new starter. I looked for a thread on this topic. Any recommended sources? Options? Pointer to previous threads? My engine is the original Westerbeke. Many thanks James Blackwell “…

---

## [Bloopers , Kites and such](https://nonsuch.discourse.group/t/bloopers-kites-and-such/1332)

<div class="topic-metadata">

**Author:** [@Google-group-posting](https://nonsuch.discourse.group/u/Google-group-posting)\
**Replies:** 1\
**Last updated:** [August 2, 2025, 2:49pm UTC](https://nonsuch.discourse.group/t/bloopers-kites-and-such/1332 "2025-08-02T14:49:08Z")

</div>

I had a blooper that came with the boat and I am still disappointed just how ineffective it was. Narrow at the foot and hoisted 40 off feet to the top it was hardly worth effort as over 9 K apparent the bow would be divi…

[Previous page](https://nonsuch.discourse.group/c/mirror/18.md)

[Next page](https://nonsuch.discourse.group/c/mirror/18.md?page=2)
