# Suggestions for storing an anchor on the bow **URL:** \ **Category:** Questions & Answers\ **Created:** [September 2, 2026, 5:59pm UTC](https://nonsuch.discourse.group/t/suggestions-for-storing-an-anchor-on-the-bow/10565 "2026-09-02T17:59:39Z")\ **Posts on this page:** 8\ **Page:** 1
**Author:** ![Jeff](https://avatars.discourse-cdn.com/v4/letter/j/e19b73/32.png) [@Jeff](https://nonsuch.discourse.group/u/Jeff)\ **Post date:** [September 2, 2026, 5:59pm UTC](https://nonsuch.discourse.group/t/suggestions-for-storing-an-anchor-on-the-bow/10565/1 "2026-09-02T17:59:39Z")
My NS26 had one of those “paperclip” bowsprit/anchor rollers at some point in the past, but it’s gone now. The mounting bolts are still in the hull and stem, though. I’m currently using a 25 lb Manson Supreme as my primary anchor, and it’s a bear to get back up onto the deck—especially when it comes up covered in mud. I really need a better system. Last I checked, the bowsprit/anchor roller from Doug Gierula was around $2,500, plus shipping and whatever tariff BS gets added on. I’m just not sure I want to spend that much right now. One option I’m considering is mounting a generic stainless anchor roller between the aluminum Samson post and the fairlead. Space would be pretty tight, but something like this: [https://defender.com/en\_us/windline-stainless-steel-anchor-bow-roller-urm-4](https://defender.com/en_us/windline-stainless-steel-anchor-bow-roller-urm-4) My concern is that the roller really can’t project very far beyond the bow without some support from below. Otherwise, it becomes a pretty good lever acting on the deck. But if I keep it short enough to limit that leverage, I’m worried the anchor/roller will interfere with the mooring pennant. Has anyone come up with a better solution on an NS26? Maybe a simple roller with a lower brace to the stem, or some other arrangement I’m overlooking? Ideas and photos would be very welcome! ---
**Author:** ![Aloki329](https://yyz1.discourse-cdn.com/flex011/user_avatar/nonsuch.discourse.group/aloki329/32/812_2.png) [@Aloki329](https://nonsuch.discourse.group/u/Aloki329)\ **Post date:** [September 2, 2026, 7:53pm UTC](https://nonsuch.discourse.group/t/suggestions-for-storing-an-anchor-on-the-bow/10565/2 "2026-09-02T19:53:38Z")
Have you contacted Klacko in Canada? They might have something that was made for a 26. The bow extension that was a stock item on my 30 ultra was designed and has performed flawlessly . > **[Klacko Marine Inc.](https://klacko.ca)** > > Klacko Marine is a metal fabricating service located in St.Catharines. Mainly focussed on stainless steel and aluminum for the marine industry, we also provide tube bending, fabrication and welding for commercial, industrial, food, wine, beer and... ---
**Author:** ![Jeff](https://avatars.discourse-cdn.com/v4/letter/j/e19b73/32.png) [@Jeff](https://nonsuch.discourse.group/u/Jeff)\ **Post date:** [September 3, 2026, 12:34am UTC](https://nonsuch.discourse.group/t/suggestions-for-storing-an-anchor-on-the-bow/10565/3 "2026-09-03T00:34:15Z")
I did, that’s the $2500 number, plus shipping and tariffs. I may eventually opt for this if I don’t come up with anything else. ---
**Author:** ![Aloki329](https://yyz1.discourse-cdn.com/flex011/user_avatar/nonsuch.discourse.group/aloki329/32/812_2.png) [@Aloki329](https://nonsuch.discourse.group/u/Aloki329)\ **Post date:** [September 3, 2026, 1:35am UTC](https://nonsuch.discourse.group/t/suggestions-for-storing-an-anchor-on-the-bow/10565/4 "2026-09-03T01:35:31Z")
No one said yachting is inexpensive ! ---
**Author:** ![RonB](https://avatars.discourse-cdn.com/v4/letter/r/ce73a5/32.png) [@RonB](https://nonsuch.discourse.group/u/RonB)\ **Post date:** [September 3, 2026, 1:37am UTC](https://nonsuch.discourse.group/t/suggestions-for-storing-an-anchor-on-the-bow/10565/5 "2026-09-03T01:37:39Z")
I’m considering taking my factory roller assembly off. It’s heavy and doesn’t make my boat faster… lol. I rarely anchor anyway. So, it could be available. RonB. Pender Harbour, BC. ---
**Author:** ![Jeff](https://avatars.discourse-cdn.com/v4/letter/j/e19b73/32.png) [@Jeff](https://nonsuch.discourse.group/u/Jeff)\ **Post date:** [September 3, 2026, 10:04am UTC](https://nonsuch.discourse.group/t/suggestions-for-storing-an-anchor-on-the-bow/10565/6 "2026-09-03T10:04:15Z")
Or ever will! ---
**Author:** ![Jeff](https://avatars.discourse-cdn.com/v4/letter/j/e19b73/32.png) [@Jeff](https://nonsuch.discourse.group/u/Jeff)\ **Post date:** [September 3, 2026, 10:11am UTC](https://nonsuch.discourse.group/t/suggestions-for-storing-an-anchor-on-the-bow/10565/7 "2026-09-03T10:11:45Z")
Ron, should you ever decide to go. That route interested. I’ll sail around and pick it up! ---
**Author:** ![RonB](https://avatars.discourse-cdn.com/v4/letter/r/ce73a5/32.png) [@RonB](https://nonsuch.discourse.group/u/RonB)\ **Post date:** [September 4, 2026, 1:38am UTC](https://nonsuch.discourse.group/t/suggestions-for-storing-an-anchor-on-the-bow/10565/8 "2026-09-04T01:38:20Z")
Wouldn’t that be an adventure!!!