I have a 1984 Nonsauch 30U with a Westerbeke 27 Vee Drive. Nedd to
replace the prop shaft. Anyone know the lenght? (Could measure after I
pull the boat, but want to order new shaft before pulling.)
Checked with Mark Ellis. Advised to view shaft log in manual. Length
not specified in log.
George
You might want to contact the fellow who now has the Nonsuch factory drawings. He posted the strut dimensions perhaps you might check that.
Thanks, Mike. I’ve sent him (Venturesail) an inquiry.
George
Mike,
Bill sent the drawings for the shaft. The length is 52 3/4". What a tremendous resource. Thanks again for the lead.
George
Glad you were able get the info. Good to know too. Though had to cut Bianka’s down a bit when I went electric. .