Would like to communicate with Nonsuch 33 owners who have installed a Dry Bilge system. Next on my DIY list is installation of a Dry Bilge system by SeaFlo. Would like to communicate with someone who has already made such an installation so that I might learn specific details of installation and minimize challenges and problems. Email, txt, phone is fine with me; pictures of course might be worth a thousand words.
Ed Strazzini
N33 #36
Ed,
There’s some useful information in this thread, in case of interest: Bilge pumps, besides the manual one, what have you done?
– Bob
Bob, I haven’t done anything yet with my SeaFlo dry-bilge unit as I was hoping to make contact with another N33 owner who had done all the smart work as far as placement and wiring. The N33 has a long bilge part of which is covered by the below cabin sole with a holding tank making access to any such device under it problematic. So I left to decide where (fwd or aft) to set the sucker as well as where to place the pump timer unit, route the hoses and wiring. I’ll detail my installation whenever I get going on the project but still holding out for info from someone smarter than me.
In that case, I’m definitely of no use.
– Bob
Ed
You should follow up on Bob’s response and the included link.
The solution proposed should answer all your questions and it is so cheap you would not believe anyone, who disqualified himself for lacking smartness, could have such good luck in finding a perfect answer.
Fran