Ron
The adhesive used was Silaprene and the gasket size for the portholes was as follows
- 5”x 12” porthole - 3/8”
- 7” x 24” porthole - 3/8”
- XR 90 small overhead hatch - 3/8”
- XR 200 and XR 300 large overhead hatches - 1/2”
This is as per the invoice from Atkins & Hoyle. I see that Gary Forstner in his emails of yesterday identified alternative materials and sources.
Ken Dakin
NS 33 # 7
Sashay
Kingston ON